 |
|
Target Segment |
- High-end
workstation, server, and internet application
|
|
Form Factor |
- Extended ATX
- Size: 12" x 13" (W x
H)
|
|
Processor Support |
- Dual Intel 603-pin
Xeon processors 1.50-2.40GHz and faster
|
|
Chipset |
|
|
Front Side Bus |
|
|
Memory |
-
Dual Channel 600/800 MHz RDRAM with Transfer Rate up
to 3.2 GB/s
- Four 184-pin RIMMs
for 600/800 MHz RDRAM up to 2 GB
-
Two Rambus Inline memory modules
of the same memory size is the minimum requirement.
|
|
I/O Expansion |
- 2 64-bit 66MHz PCI
- 4 32-bit 33MHz PCI
- 1 4xAGP Pro 1.5V
|
|
Onboard Devices |
-
Dual EIDE ports support
Ultra DMA 100MB/s of Burst data transfer rate,
supports UDMA Mode 5, PIO Mode 4 and ATAPI
-
VRD (Voltage Regulator
Down)
-
AC97' Audio
-
Intel 82559 LAN
controller
-
PC hardware health
monitoring
-
1 Floppy
-
2 Fast UART 16550 serial
ports
-
1 ECP/EEP parallel port
-
1 Infrared header
-
Up to 4 USB ports
-
PS/2 keyboard and mouse
ports
|
|
Other Feature |
- ACPI/APM power
management
- Internal/external
modem ring-on
- Control of power-on
mode for recovery from AC power loss
- One WOL
(Wake-On-LAN) connector
- One chassis
intrusion connector
|
|
PC Health Monitoring |
- Monitoring the
voltages of the CPU core and the status of system
power supply (+3.3V, + 5V, + 12V)
- CPU/chassis
temperature monitoring
- CPU fan auto-off in
sleep mode
- CPU overheat LED
header
- LED and control for
chassis intrusion detection
- System resource
alert
- Support for system
management software
|
|
| Special
Feature |
 - Suspend to RAM (STR):
All tasks are stored in RAM and can be resumed within
10 seconds from the minimum power consuming suspend
mode.
- Wake-on-LAN allows
for remote network management and configuration of the
PC, even in off-hours when the PC is turned off. This
reduces the complexity of managing a network.
- Onboard 3-phase
switching power regulator supports CPU core voltages
from 1.1-1.85 volts
- 4 tachometer fan
connectors (for CPU, chassis, and thermal control
fans)
- Keyboard wake-up
from Soft-off
- CPU frequency
settings - changeable in BIOS setup
- Connector for LED
overheat indicator
- Overheat backup fan
connector for CPU protection
|
|
BIOS Feature |
- Supports ACPI
(Advanced Configuration and Power Interface) and APM
(Advanced Power Management)
- Slow blinking LED
for Sleep State indicator
- Main switch
override mechanism. Power-up mode control upon
recovery from AC power loss
- PC Health Monitoring
protects your system from problems even before they
occur.
- DMI support
- ACPI/APM power
management
- RTC (Real-Time
Clock) wakeup
- External modem
remote ring-on when system is in Soft-Off state
- BIOS rescue
hot keys for rescuing BIOS chip from flash failure
- Hardware BIOS virus
protection
- 4Mb Flash ROM
|
|
Chassis Compatibility |
- Extended ATX Chassis
- SC760P4 (400W)
-
To ensure system stability, a 400W (minimum) ATX12V
power supply (with both 4-pin and 8-pin +12v power
connector) is required.
|
|
Standard Retail Package |
- One SUPER
P4DCE+ mainboard
- CPU heatsink
retention and clips
- 1 three-ended
80-wire/40-pin IDE UDMA/100 ribbon cable for high
speed UDMA IDE devices
- 1 floppy ribbon
cable
- 2 Fan-041 with
heatsink
- Two TMR-007
- One BIOS/drivers CD
|
|
